A heat-activated aerosol fire-suppression device can respond inside a suitable enclosure without someone pulling a trigger. It is a different job from a handheld extinguisher: the device waits in a selected space and activates when its sensing arrangement reaches the specified temperature.
Explore the illustrated guide. Swipe, scroll, or focus the gallery and use the arrow keys.
Heat triggers release; particles interrupt flames
Condensed aerosol systems convert a solid aerosol-forming material into fine particles carried in gas. Those particles interfere with the chemical reactions that sustain flames. This general explanation does not mean every manufacturer's formulation, approval or fire performance is the same.
It also does not mean the aerosol is harmless smoke to breathe. Activation, clearances, exposure precautions and ventilation must follow the actual device's instructions.
One model's numbers are not universal
The OUGIST device shown in the carousel activates when local heat at its sensing cord reaches approximately 338°F (170°C). That is a model-specific sensing temperature, not the temperature required throughout the enclosure.
Its listed aerosol discharge duration is six seconds or less after activation. Discharge duration is not a guarantee that every fire will be extinguished in six seconds. The device is single-use and must be replaced after activation.
The enclosure determines the fit
Match enclosure volume, ventilation, fire hazard and installation conditions to the documented application. Small dimensions alone do not establish protection capacity. Pre-applied adhesive backing calls for a clean, flat, dry and secure surface; sensing cords must be routed as instructed, clear of moving parts and continuously hot surfaces.
For this model, remove both protective caps only after installation is complete, following the supplied directions. Keep inspection and replacement instructions with the device. Rated service life and warranty coverage are different measures.
Choose the application before the device
This is supplementary protection for suitably matched small enclosed compartments. It does not replace required portable extinguishers or a professionally designed suppression system. Start with the manufacturer's installation limits, then decide whether your particular space fits them.
Sources
- FirePro: condensed aerosol suppression mechanism
- OUGIST: heat-activated device and installation limits
Explore the Ougist heat-activated aerosol device for a manufacturer-matched small enclosed compartment.







